Administration - Mesh

OVERVIEW

---

Administration is used to access important system components. There are multiple components inside Administration, this page is focused on the Mesh component.

When a system is using VersaCall hardware such as IO Modules, Touch Screens or Wireless Lights, the wireless mesh technology it being used. A Coordinator is required to be connected to the Server. This connection can be through USB or Ethernet.

This guide does not cover the hardware installation, only the setup after a Coordinator has been connected to the computer vis USB or Ethernet.

NAVIGATION

---

Administration can be accessed via the Home page menu or the Administration icon. Once Administration has been selected - select Mesh from the menu.

   USB     |    Ethernet     |    Delete     |    Return to Administration   

ADD USB COORDINATOR

---

Installation on New Computer - Computer Provided by VersaCall

Select a Guide Below for Detailed Instructions

---

Add-On Coordinator Installation - Computer Provided by VersaCall

Select a Guide Below for Detailed Instructions

   USB     |    Ethernet     |    Delete     |    Return to Administration   

ADD ETHERNET CONNECTED COORDINATOR

---

Installation on Linux (Ubuntu) OS

Select a Guide Below for Detailed Instructions

---

Installation on Red Hat (8 or 9) OS

Select a Guide Below for Detailed Instructions

   USB     |    Ethernet     |    Delete     |    Return to Administration   

DELETE A COORDINATOR

---

Click on the 3 dot menu for the Coordinator that needs to be removed.

---

A pop-up window will load, click on the Delete option in the list.

---

A warning message will appear on the screen. Select Delete to remove the Coordinator or select Cancel to keep the Coordinator.

---

If Delete was selected, a Success message will appear at the bottom of the screen.

---

The Coordinator that was selected for deletion will no longer appear on the Coordinator list.

   USB     |    Ethernet     |    Delete     |    Return to Administration   

---