Actions

View a Capcode - Pager

From VersaVision Support

Revision as of 15:37, 5 June 2024 by VVSupportAdmin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


View-Cap-Main.png

OVERVIEW

Pagers are used with the Paging Transmitter. Each pager has a unique code, called a "Capcode", to identify it. This is how the system is able to send a specific message to a specific pager.
This page explains how to View/Find the Capcode that has been programmed into the pager.


LAYOUT

The guide will refer to the buttons found on the front of the pager. Below is a layout of each button and the battery compartment.
Pager-Program-1.png
1 - LCD (Readout) Screen.
2 - Right & Left Navigation Buttons.
3 - Function Button.
4 - Read (Power) Button.
Pager-Program-2.png
5 - Battery Cover Lock.
6 - Battery Cover.


    Setup Capcode           |          View Capcode           |          Add a Pager    

Additional Information      Requirements     |    Transmitter Setup     |    Return to Administration   


INSTRUCTIONS

On the back side of the pager, unlock the Battery Cover by sliding the Lock in toward the center of the Cover.
Pager-Program-3.png

Remove the Batttery Cover.
Pager-Program-4.png

Remove the AAA battery inside.
Pager-Program-5.png

Press and Hold Down the "Function" (# 3 on the Layout) button.
Pager-Program-6.png

Insert the AAA battery while Holding Down the "Function" button.
Pager-Program-7.png

After a few seconds the LCD Screen will show a "Password". Press the "Read" (# 4 on the Layout) button One time.
Pager-Program-8.png

The LCD Screen will now show the "Frequency" of the Pager. Press the "Read" (# 4 on the Layout) button One time.
Pager-Program-9.png

The LCD Screen will now show the Capcode information. Make note of the Capcode.
Pager-Program-10.png

Remove the AAA battery.
Pager-Program-5.png

Insert the AAA battery - Do Not hold down any buttons.
Pager-Program-7.png

Replace the Battery Cover.
Pager-Cap-1.png

Slide the Battery Cover Locks to the Outside.
Pager-Cap-2.png

The LCD Screen will show the pager home screen with the Date, Time and Battery Life.
Pager-Cap-3.png

Use the Capcode information to add it to a Contact in the VersaVision software.


    Setup Capcode           |          View Capcode           |          Add a Pager    

Additional Information      Requirements     |    Transmitter Setup     |    Return to Administration   


VC Footer.png
Follow Us On LinkedIn View our Blog