IT - 2-Way Radio

OVERVIEW

The information provided below is intended for the IT Department. This will provide basic information they may need to setup a 2-Way Radio Module when it has been added to the VersaVision system.

---

GENERAL

2-Way Radio Modules contain a Motorola Base unit that is programmed to the Facilities FCC frequencies. The Module operates over a network connection.
To facilitate audio messages the 2-way radio uses Text-to-Speech via a small SBC inside the module case.

---

---

REQUIREMENTS

110v Power Outlet within 6’ of placement/location.

Ethernet Port within 6’ of placement/location.

Pre-Installed Static IP Address (VersaCall) or DHCP Reserved IP Address based on the MAC Address of the Coordinator (Customer IT).

Channel Information - must be programmed to the current channel configuration in the facility.

Facility Radio Contractor or Radio Supervisor should be able to provide Channel Information or Radio Configuration File.

SPECIFICATIONS

Dimensions – 13.5” (W) x 15.5” (L) x 6.25” (H)

(1) 6’ Power Cord (included)

(1) 6’ Ethernet Cable (included)

(1) 7” Antenna (included)

Supports up to 15 analog or digital channels (Mototrbo).

UHF (403 - 470 MHz, 450 - 512 MHz) or VHF (136 - 174 MHz).

Runs a web-server app on Ubuntu 20.04 LTS.

Ports - HTTP: 80, SSH: 22)

• 

  Image 1 of 3

• 

  Image 2 of 3

• 

  Image 3 of 3

---

---