IT - Paging Transmitter
From VersaVision Support
OVERVIEW
The information provided below is intended for the IT Department. This will provide basic information they may need to setup a Paging Transmitter when it has been added to the VersaVision system.
GENERAL
Paging Transmitters communicate with hand-held pagers and pager watches using a 457.575 mhz signal.
REQUIREMENTS
- 110v Power Outlet within 6’ of placement/location.
- Ethernet Port within 1.5’ of placement/location. A longer Ethernet Cable can be used if needed.
- Pre-Installed Static IP Address (VersaCall) or DHCP Reserved IP Address based on the MAC Address of the Coordinator (Customer IT).
- Outgoing Ports - Click Here for information about Ports related to a Remote Paging Transmitter.
SPECIFICATIONS
- Transmitter Dimensions – 3.25” (W) x 5.25” (L) x 1.125” (H)
- (1) 6’ Power Cord (included)
- (1) 1.5’ Ethernet Cable (included)
- (1) 7” Antenna (included)