IT - USB Connected Light Stack
From VersaVision Support
OVERVIEW
The information provided below is generally used by Maintenance or Facility Personnel. This will provide basic information they may need to install & mount a USB Connected Light Stack.
GENERAL
USB Lights MUST be connected to a Mesh Enabled Touch Screen.
- NOTE: USB Light Stacks DO NOT work with Computers or Tablets.
- Click Here for more information about a Coordinator.
Module Configurations determine how the lights are used.
Lights are powered by the Touch Screen, no additional power cord.
REQUIREMENTS
- Mounting location that can accept screws or screw holes for mounting bracket.
- VersaVision (Mesh) Touch Screen within 9 feet of placement/location.
- Clearance for attached light stack at placement/location.
- Will vary depending on the number of lights.
SPECIFICATIONS - LIGHT STACK
- Base – 2.5” (W) x 2.75” (L)
- Light – 2.5” (W) x 1.75” (L)
- 3 Lights (No Base) – 2.5” (W) x 7.5” (L)
- 5 Lights (No Base) – 2.5” (W) x 11” (L)
- (1) 10’ USB Cord (included)
SPECIFICATIONS - BASE
- Base – 2.85” (W) x 3.55” (L) x 2.75” (H)
- 3 Lights (On Base) – 3.55” (W) x 10” (L)
- 5 Lights (On Base) – 3.55” (W) x 13” (L)