Actions

IT - Coordinator Requirements

From VersaVision Support


Coor-Req-Main.png

OVERVIEW


The information provided below is intended for the IT Department. This will provide basic information they may need to setup a Coordinator when VersaCall Hardware has been purchased.


GENERAL


VersaCall Hardware communicates with the VersaVision Server using a 900mhz mesh signal. A Coordinator is required to receive signals from the individual modules and to send commands to those modules.
CLICK HERE for detailed information about the Mesh Signal/Network.


REQUIREMENTS


USB Coordinator
110v Power Outlet within 6 feet of placement/location.
VersaCall Computer/Server within 6 feet of placement/location.
Must be a Computer/Server Provided by VersaCall.
Real-Port Coordinator
110v Power Outlet within 6 feet of placement/location.
Ethernet Port within 6 feet of placement/location.
Pre-Installed Static IP Address (VersaCall) or DHCP Reserved IP Address based on the MAC Address of the Coordinator (Customer IT).
Outgoing Ports - Click Here for information about Ports related to a Remote Coordinator.


SPECIFICATIONS


Dimensions – 3.5” (W) x 4.5” (L) x 1.5” (H)
(1) 6’ Power Cord (included) - USB & Real-Port
(1) 6' USB Cord (included) - USB Only
(1) 6’ Ethernet Cord (included) - Real-Port Only
(1) 7” Antenna (included) - USB & Real-Port


DIAGRAM




USB Guides
Select to View Page
Select to View Page Select to View Page AddOn-Coor-Btn.png Select to View Page
Ubuntu Guides
Select to View Page
Select to View Page Select to View Page Select to View Page Select to View Page
Red Hat Guides
Select to View Page
Select to View Page Select to View Page Select to View Page Select to View Page

Other Pages Select to View Page Select to View Page

VC Footer.png
Follow Us On LinkedIn View our Blog