Actions

Count - PSM

From VersaVision Support


Count-Main.png

OVERVIEW

Counts are Monitoring Points that can be setup to capture when a piece/part has been completed.
A Count on a PSM has 3 different types available:
Default - simple Count - press the button increase the Count by 1.
Distribution - Count that allows the user to enter a count for multiple items/reasons.
Quantity - Count that allows the user to enter a Total Pieces.
This page will provide information on each property required to each Count Type.


NAVIGATION

To access the Count setup, the user will need to select an existing Count under Monitoring Points or select to Add a new Count.
Count-PSM-1.png
Count-PSM-2.png


DEFAULT COUNT                                            

       Operation        |        Setup       

DISTRIBUTION COUNT                                   

       Operation        |        Setup       

QUANTITY COUNT                                         

       Operation        |        Setup       

OTHER                                                            

  PSM  |   Tags   |   Actions   |   List  


DEFAULT OPERATION

A Default Count button would show as a button on the PSM interface in the bottom right corner of the screen.
The user would press the button to increase the Count by 1.
Count-PSM-3.png

The Count button will show the total Count.
Count-PSM-4.png


DEFAULT CONFIGURATION

After selecting to Add or Edit a Count, the Properties will show on the right side of the screen. Click in the Count Name field
Count-PSM-10.png

Enter a Name for the Count. This name will appear on the Count button. Click on the down arrow in the Mode field.
Count-PSM-11.png

There will be 2 options for the Mode.
Select the best option for the Count being created.
Count-PSM-12.png
Shift - selecting the option will reset the Count at the end of every Shift.
Day - selecting this option will reset the Count at the end of the Day (midnight).

Click on the down arrow in the Color field.
Count-PSM-13.png

A list of 11 Colors will be available.
Select the best Color for the Count being created.
Count-PSM-14.png

Toggle the "Allow Operator to Increment" ON.
This allows the Operator to increase the Count by selecting the Count button on the interface.
Count-PSM-15.png

Toggle the "Allow Operator to Increment" OFF.
The Operator will be blocked from manually increasing the Count.
The Count will have to be obtained from a Machine Input.
Count-PSM-16.png

Set the Input Method field to Default when the "Allow Operator to Increment" is enabled.
Count-PSM-17.png

By default, all Counts will be tagged as "type_count".
VersaCall suggests Tagging the Count for easier Report & Dashboard creation.
Click on the Add Tag button.
Count-PSM-18.png

Select the Link below for detailed information on setting up a Tag.
Tag-Link.png

Counts will have the Actions option available.
Click on the Add Action button to setup an Action for the Count
Count-PSM-19.png

Select the Link below for detailed information on setting up an Action.
Actions-Link.png


DEFAULT COUNT                                            

       Operation        |        Setup       

DISTRIBUTION COUNT                                   

       Operation        |        Setup       

QUANTITY COUNT                                         

       Operation        |        Setup       

OTHER                                                            

  PSM  |   Tags   |   Actions   |   List  


DISTRIBUTION OPERATION

A Distribution Count button would show as a button on the PSM interface in the bottom right corner of the screen.
The user would press the button to increase the Count by Item/Part.
Count-PSM-3.png

A menu of Items/Parts will show on the screen.
The user will click on the "+" button to increase the Count.
Use the "-" button to decrease the Count.
Count-PSM-21.png

Once the appropriate Count has been entered - click on the Submit button.
Count-PSM-22.png

The Count button will show the total Count.
Count-PSM-23.png


DISTRIBUTION CONFIGURATION

After selecting to Add or Edit a Count, the Properties will show on the right side of the screen.
Click in the Count Name field
Count-PSM-24.png

Enter a Name for the Count.
This name will appear on the Count button.
Click on the down arrow in the Mode field.
Count-PSM-25.png

There will be 2 options for the Mode.
Select the best option for the Count being created.
Count-PSM-26.png
Shift - selecting the option will reset the Count at the end of every Shift.
Day - selecting this option will reset the Count at the end of the Day (midnight).

Click on the down arrow in the Color field.
Count-PSM-27.png

A list of 11 Colors will be available.
Select the best Color for the Count being created.
Count-PSM-28.png

Toggle the "Allow Operator to Increment" ON.
This allows the Operator to increase the Count by selecting the Count button on the interface.
Count-PSM-29.png

Toggle the "Allow Operator to Increment" OFF.
The Operator will be blocked from manually increasing the Count.
The Count will have to be obtained from a Machine Input.
Count-PSM-30.png

Select the down arrow on the Input Method field.
Set the Input Method field to Distribution when the "Allow Operator to Increment" is enabled.
Count-PSM-31.png

Click on the down arrow in the List Type field.
The list selected, in the next section, will show as the individual Items/Parts menu.
Count-PSM-32.png

There will be 3 options available.
Select the best option for the Count being created.
Count-PSM-33.png
Custom - select this option to setup a List specifically for the configuration being setup.
Global - select this option to select a List that has been setup in the system.
Lookup - select this option to use a Command to get a List from a Table that has been setup in the system.

Select the Link below for detailed information on setting up a Custom List.
Custom-List-Link.png

When selecting a Global List, click on the down arrow in the List field.
Count-PSM-34.png

A list of all the Lists setup in Assets-Lists will show.
Click on the List that is needed for the Count being created.
Count-PSM-35.png

When selecting a Lookup List, click on the down arrow in the Command field.
Count-PSM-36.png

A list all the List Lookup Commands setup in the system will show.
Click on the Command that is needed for the Count being created.
Count-PSM-37.png

By default, all Counts will be tagged as "type_count".
VersaCall suggests Tagging the Count for easier Report & Dashboard creation.
Click on the Add Tag button.
Count-PSM-38.png

Select the Link below for detailed information on setting up a Tag.
Tag-Link.png

Counts will have the Actions option available.
Click on the Add Action button to setup an Action for the Count
Count-PSM-19.png

Select the Link below for detailed information on setting up an Action.
Actions-Link.png


DEFAULT COUNT                                            

       Operation        |        Setup       

DISTRIBUTION COUNT                                   

       Operation        |        Setup       

QUANTITY COUNT                                         

       Operation        |        Setup       

OTHER                                                            

  PSM  |   Tags   |   Actions   |   List  


QUANTITY OPERATION

A Quantity Count button would show as a button on the PSM interface in the bottom right corner of the screen.
The user would press the button to increase the Count.
Count-PSM-3.png

A entry menu will show on the screen.
The user will click on the "+1" or "+10" button to increase the Count.
Use the "-1" or "-10" button to decrease the Count.
Count-PSM-41.png

Once the appropriate Count has been entered - click on the Submit button.
Count-PSM-42.png

The Count button will show the total Count.
Count-PSM-43.png


QUANTITY CONFIGURATION

After selecting to Add or Edit a Count, the Properties will show on the right side of the screen.
Click in the Count Name field.
Count-PSM-44.png

Enter a Name for the Count.
This name will appear on the Count button.
Click on the down arrow in the Mode field.
Count-PSM-45.png

There will be 2 options for the Mode.
Select the best option for the Count being created.
Count-PSM-46.png
Shift - selecting the option will reset the Count at the end of every Shift.
Day - selecting this option will reset the Count at the end of the Day (midnight).

Click on the down arrow in the Color field.
Count-PSM-47.png

A list of 11 Colors will be available.
Select the best Color for the Count being created.
Count-PSM-48.png

Toggle the "Allow Operator to Increment" ON.
This allows the Operator to increase the Count by selecting the Count button on the interface.
Count-PSM-49.png

Toggle the "Allow Operator to Increment" OFF.
The Operator will be blocked from manually increasing the Count.
The Count will have to be obtained from a Machine Input.
Count-PSM-50.png

Set the Input Method field to Quantity when the "Allow Operator to Increment" is ON.
Count-PSM-51.png

By default, all Counts will be tagged as "type_count".
VersaCall suggests Tagging the Count for easier Report & Dashboard creation.
Click on the Add Tag button.
Count-PSM-52.png

Select the Link below for detailed information on setting up a Tag.
Tag-Link.png

Counts will have the Actions option available.
Click on the Add Action button to setup an Action for the Count
Count-PSM-19.png

Select the Link below for detailed information on setting up an Action.
Actions-Link.png


DEFAULT COUNT                                            

       Operation        |        Setup       

DISTRIBUTION COUNT                                   

       Operation        |        Setup       

QUANTITY COUNT                                         

       Operation        |        Setup       

OTHER                                                            

  PSM  |   Tags   |   Actions   |   List  


VC Footer.png
Follow Us On LinkedIn View our Blog