IT - Touch Screen
From VersaVision Support
OVERVIEW
Touch Screens, supplied by VersaCall can connect via the Mesh Communications Network (VersaCall Provided) or Ethernet and WiFi Network (Facility Provided).
- Click Here for instructions on installing a MESH Connected Touch Screen.
- Click Here for instructions on installing a NETWORK Connected Touch Screen.
This page provides Specification information and Architecture images for both types.
TOUCH SCREEN SPECIFICATIONS
- System
- CPU - Quad Core Cortex A17, 1.6G, RK3288
- RAM - 2 GB
- OS - Android 8.1
- Touch Screen - 10 Point Capacitive Touch
- Dispaly
- Panel - 10.1" LC IPS
- Resolution - 1280 x 800
- Contrast Ratio - 800
- Aspect Ration - 16 : 10
- Network
- Wi-Fi - 802.11 b/g/n
- Ethernet - 10M / 100M
- Bluetooth - 4.0
- Other
- Working Temperature - 32 - 150 Degrees Fahrenheit
- System
TOUCH SCREEN SCHEMATIC
REQUIREMENTS
- Must have a Mount of some type as the Touch Screen must be powered.
- Device must be mounted within 6 feet of a 110v Power Outlet.
- Mesh Connected Devices
- Mount in an area free of Metal Enclosures.
- Do Not Mount the Touch Screen inside of a Metal Cabinet.
- Do Not Mount the Touch Screen inside of an I-Beam.
- Mount in a location that is within 100 feet of the Coordinator or other Mesh Connected Device.
- Mount in an area free of Metal Enclosures.
- Network Connected Devices
- Ethernet - Mount in an area where an Open Ethernet Port is located.
- Wi-Fi - Mount in an area where a Wi-Fi signal can be obtained and reliably maintained.