IT - Coordinator Requirements

OVERVIEW

The information provided below is intended for the IT Department. This will provide basic information they may need to setup a Coordinator when VersaCall Hardware has been purchased.

---

GENERAL

VersaCall Hardware communicates with the VersaVision Server using a 900mhz mesh signal. A Coordinator is required to receive signals from the individual modules and to send commands to those modules.

CLICK HERE for detailed information about the Mesh Signal/Network.

---

---

REQUIREMENTS

USB Coordinator

110v Power Outlet within 6 feet of placement/location.

VersaCall Computer/Server within 6 feet of placement/location.

Must be a Computer/Server Provided by VersaCall.

Real-Port Coordinator

110v Power Outlet within 6 feet of placement/location.

Ethernet Port within 6 feet of placement/location.

Pre-Installed Static IP Address (VersaCall) or DHCP Reserved IP Address based on the MAC Address of the Coordinator (Customer IT).

Outgoing Ports - Click Here for information about Ports related to a Remote Coordinator.

---

SPECIFICATIONS

Dimensions – 3.5” (W) x 4.5” (L) x 1.5” (H)

(1) 6’ Power Cord (included) - USB & Real-Port

(1) 6' USB Cord (included) - USB Only

(1) 6’ Ethernet Cord (included) - Real-Port Only

(1) 7” Antenna (included) - USB & Real-Port

• 

  1 of 2

• 

  2 of 2

---

---