Machine Interface Module
From VersaVision Support
- OVERVIEW
- This page has basic information with links to more in depth information on each Monitoring Point Type.
- A Machine Interface Module is a device that will be able to accept wired inputs from a Machine.
- This device can also send a signal to the Machine.
-
- Input Example - Machine would send a signal when the Machine is Down. The Machine Interface Module would monitor that input and set an Alert with Communications when active.
- Output Example - Machine Interface Module would send a signal to the Machine that it cannot start until the operator connects the Safety Key.
- A Machine Interface Module can be configured to accept the following items:
- Monitoring Points
- Alerts Count
- Child Monitoring Point
- Child Data Field
- Expansions
- Stack Light (Wireless Controls Module) I/O
- Monitoring Points
- NAVAGATION
- To access the New/Edit Machine Interface Module page, the user would need to select to Add a Machine Interface Module or Edit a Machine Interface Module on the Modules - Configuration page.
-
- SELECT A SECTION FOR MORE INFORMATION
 |
|
|